This guide teaches how to alter a pattern to better fit around the neck and shoulder area. The guide also demonstrates a specific technique for tightening the neck curve on a pattern by taking in the shoulder area without altering the center front, center back, or overall neck curve shape.

How to find the proper armhole depth for creating slopers and fitted garments. I cover measuring key points like the shoulder line, chest line, and back shoulder blade to determine the armhole shape and depth, which should be slightly smaller than the final desired fit to allow for adjustments during draping and patternmaking.

This guide demonstrates how to draft a knit t-shirt pattern from a fitted bodice block pattern. It covers converting the bodice block into a basic t-shirt shape, adjusting for stretch at the neckline and bust, and drafting a sleeve. Additionally, it shows how to create an oversized t-shirt variation by slashing and spreading the pattern pieces.

Print this PDF for future reference!

How to transfer a controlled flare skirt from draping to pattern. I demonstrate how to create both the front and back pattern pieces, add length, and create a smooth hemline. I also explain how to add facings and finish the skirt professionally.

In this guide, I explain the measurements needed for drafting a close-fitting master torso block, including bust, nape to waist, waist to hip, armhole depth, neckline, shoulder, back width, dart, and chest. I discuss the differences between this drafting method and draping, highlighting that this technique is more technical and easier to size up or down.

How to draft a custom tailored skirt foundation pattern using personal measurements. I demonstrate the step-by-step process of creating both the back and front pattern pieces, including how to place darts, shape the waistline, and add seam allowances.

In this guide, I walk you through the process of drafting a bespoke fitted master torso block. I cover everything from setting up your paper with the correct measurements to creating the back and front sections, including details on how to draft the neckline, shoulder line, darts, and armholes.

I demonstrate how to modify a pattern block to create a dropped shoulder design without sleeves. I extend the shoulder line by an inch or two, then drop the underarm area by the same amount to provide extra room. Additionally, I curve the shoulder area slightly to prevent it from sticking out.

I explain the different types of fusible interfacings: woven, non-woven, and knit. I demonstrate various weights and applications for each type, showing how they interact with different fabrics and discussing their uses in garment construction, from lightweight silks to structured corsets. I also provide tips on selecting the right interfacing for specific projects and fabrics.

How to transfer the shoulder dart bodice to pattern. I demonstrate the process of adjusting the armhole and neckline, and folding the dart. I also show how to handle excess fabric in large darts and how to match the front and back bodice pieces.

I demonstrate how to create a relaxed and effortless dress with adjustable straps and an optional center back opening. I show the steps to finish the dress, including adding a waistband, pockets, and hemming with a bias strip. The key is to play around with the straps to achieve the desired silhouette before finalizing the length and shape.