In this session, I demonstrated how to turn the controlled flare skirt into a pattern.

I explained the crucial measurements needed, like the center front length, side lengths, and showed how to draft the pattern pieces on paper.

Lesson Steps:

• Measured the center front length, side lengths, and determined the waist placement
• Drew the center front line and marked the waist point
• Extended the side seam lines from the waist point to create the flare
• Marked the hem lengths based on measurements
• Added seam allowances and grainline markings
• Explained how to cut the fabric using the pattern, considering fabric width
• Discussed potential fabric yardage needed based on the skirt length